Stamping Products

Whether you're using a high-speed stamping press to make simple parts at breakneck speeds or doing something really tricky, like deep drawing a material that puts up a lot of resistance, the information in this technology area is sure to help. The articles, case studies, and press releases cover stamping presses, lubricants, and materials.

Filter Content
Vibratory feeder supports trays up to 175 lbs. -

Vibratory feeder supports trays up to 175 lbs.

October 24, 2013

The new 76 series vibratory feeder from Eriez® is made to handle larger application requirements. It supports trays up to about 175 lbs. and is available in all standard...

Continue Reading

Double-sheet detector works with sheets up to 0.24 in. -

Double-sheet detector works with sheets up to 0.24 in.

October 23, 2013

Prime Controls Inc. has introduced the Pulser II double-sheet detector (control model DS210) with electromagnetic smart sensors (probe model PE36M). The unit's compact NEMA 4X control housing pairs with a newly designed smart probe that can remember up to eight calibration values. The machine...

Continue Reading

Leveler flattens armor plate -

Leveler flattens armor plate

October 21, 2013

Delta Steel Technologies (DST) offers a leveler that can process flat steel from heat-treated armored plate with 250,000-PSI yield strength and edge curves in one pass. Machines are available in capacities from 2-in. armor plate to 0.005-in. food and beverage stock. For lighter gauges, the...

Continue Reading

System controls lubricant application to stamped, drawn material -

System controls lubricant application to stamped, drawn material

October 17, 2013

Industrial Innovations' Spra-Rite Alpha lubricating system controls lubricant application to stamped, drawn material or the tooling process. Suitable for small pressrooms and vanishing-oil applications, the turnkey system includes a controller, injector manifolds, stainless steel tank, nozzles,...

Continue Reading

Servo-positioning flag stop system aids setup

September 12, 2013

The new servo-positioning flag stop system from Manchester Tool & Die Inc. is designed to aid setup personnel in adjusting tube out through the machine's HMI. The system provides consistent adjustments to help speed setup times. It is available for newer M71 machines that are equipped with...

Continue Reading

Slug retention machine includes design changes

September 12, 2013

DTC Products has introduced a new version of its patented slug retention machine. The device uses a pneumatically powered grinder to machine a small, angled groove into the side wall of the die cavity in a stamping die, preventing slugs from pulling onto the die surface where they can damage the...

Continue Reading

Metalworking fluid contains 70 percent biobased content -

Metalworking fluid contains 70 percent biobased content

July 31, 2013

Cortec®'s EcoLine® metalworking fluid, powered by Nano-VpCI®, is a biodegradable, multifunctional product formulated with biobased lubricants, additives, and emulsifiers. It can be used as an alternative to chlorinated products and mineral oils. Containing 70 percent biobased...

Continue Reading

Start-stop cut-to-length line handles 80-in.-OD coil

July 24, 2013

Royalton Industries has developed a start-stop cut-to-length line for a U.S. customer. It includes a coil car with blocker rolls, cone-type uncoiler with AC feed-up drives, driven hold-down roll, peeler table with bottom pass line roll, entry feed rolls with exit side guides, two down-cut crop...

Continue Reading

Blanking line combines laser cutting, continuous coil feeding

July 8, 2013

Schuler has unveiled laser blanking lines featuring DynamicFlow Technology. The machines, which combine laser cutting with continuous coil feeding, can produce even small batches JIT and cost-effectively, according to the company. The machines can produce a variety of blank shapes simultaneously...

Continue Reading

Radius, blank punches available for springback development

June 19, 2013

Urethane Tooling & Eng. Corp. has launched a new line of aluminum and urethane radius and blank punches for forming development and tryout. The products, designed to work with the Tool-A-Thane urethane press brake die retainers and springback development tools, are available in radii of 0.02...

Continue Reading

Manifold enables quick spray nozzle connection during QDC

June 18, 2013

Industrial Innovation offers the Quick Spray Release Multi-Connection manifold. It enables single-click disconnect and connect of multiple hoses to assist with QDC for spray nozzle hookup for in-die spray application. The single-handed process helps simplify die change and reduce changeover time....

Continue Reading

Forming lubricant works with all metals

June 12, 2013

Chemtool Inc. has introduced NuSol® Alumax AG for forming of all metals, including all nonferrous and aluminum alloys and tough, exotic ferrous alloys. The lubricant includes a hydrolytic additive that upgrades the thermal stability and oxidation resistance of the fluid during the lubrication...

Continue Reading

Heavy-duty line assists press brake plate bending -

Heavy-duty line assists press brake plate bending

June 10, 2013

Wila® USA has introduced the HD heavy-duty product line to help maximize press brake productivity when bending plate from 0.3125 to 1 in. thick or when bending high, concentrated loads, such as high-tensile-strength materials in dies with smaller than normal V-openings. The line comprises...

Continue Reading

Servo drive technology helps boost press output

May 22, 2013

Schuler has announced that its ServoDirect technology now can be retrofitted to conventional flywheel presses with the aid of its patented Dualdrive technology. According to the manufacturer, modernizing presses in this way can boost press productivity by up to 50 percent. The servomotor mounts...

Continue Reading

Servomotors in press bed increase force distribution, reduce deflection -

Servomotors in press bed increase force distribution, reduce deflection

May 16, 2013

Schuler has developed the TwinServo Technology (TST) drive concept, featuring two decentralized servomotors in the press bed. The slide is pulled, not pushed, downward, making the force flow more direct and reducing deflection by about 30 percent, according to the manufacturer. Tilting...

Continue Reading