Testing and Measuring

Filter Content

American Piping Products releases online pipe dimension calculator

December 13, 2012

American Piping Products has released an online pipe dimension calculator at http://amerpipe.com/pipe-dimension-calculator/#. The company reports that this is the only calculator of its kind in the industry, built for mobile use using responsive design. The interactive chart features drop-down...

Continue Reading

Optical measuring system integrates into tube bending tool - TheFabricator.com

Optical measuring system integrates into tube bending tool

December 3, 2012

Schwarze-Robitec has developed the Springmatic optical measuring system. Integrated into a bending tool, it measures bent tubes directly while tensioned on the bending machine and either starts the required bending process or saves the correction value for subsequent bends. Tube processors can...

Continue Reading

Inspection software released in dual-column version - TheFabricator.com

Inspection software released in dual-column version

November 8, 2012

Delcam has introduced a dual-column version of PowerINSPECT inspection software. The combination of a dual-column CMM and the software allows the simultaneous measurement of different features on larger parts. Parts can be measured in a single coordinate system without repositioning. Models are...

Continue Reading

Videoscope systems suitable for tube, pipe inspections - TheFabricator.com

Videoscope systems suitable for tube, pipe inspections

October 30, 2012

Lenox Instrument Co. offers a complete line of videoscope imaging systems, including UV models that help speed inspection time and provide clear illumination of welds and surface defects such as pitting, corrosion, and denting inside tubing and pipe. The systems feature a choice of...

Continue Reading

App allows smartphone to control surface measurement drive unit - TheFabricator.com

App allows smartphone to control surface measurement drive unit

October 29, 2012

Mahr Federal has introduced a new Android® app that lets users measure common surface roughness parameters using their smartphones and other Android operating system devices. The MarSurf® One app interfaces via Bluetooth® with a Mahr RD 18 drive unit and probe to measure such...

Continue Reading

Xiris appoints MAC as main global distributor for tube inspection systems

October 15, 2012

Xiris Automation Inc., Burlington, Ont., has named Magnetic Analysis Corp. (MAC) as its exclusive distributor of products for the tube and pipe industry throughout most of the U.S., Europe, South America, and Asia. Xiris Automation develops optical metrology equipment that detects, recognizes, and...

Continue Reading

Inspection service helps ensure welds are fit for purpose

October 11, 2012

Keighley Laboratories offers a comprehensive weld testing and inspection service, including welding procedure consultancy and approval; welder qualification tests, on-site weld investigation; and through its newly upgraded Test House, a complete range of destructive, nondestructive, and...

Continue Reading

Image processing systems automate surface inspection - TheFabricator.com

Image processing systems automate surface inspection

October 9, 2012

Vitronic offers Vinspec turnkey automated surface inspection systems. The 2-D and 3-D camera-based systems generally are installed inline to inspect surfaces at production speed. Parts with any shape, area, and contours are recorded reliably, even when the part is not positioned precisely, the...

Continue Reading

Scanning probe head measures complex part features - TheFabricator.com

Scanning probe head measures complex part features

October 2, 2012

Hexagon Metrology has released the LSP-X1h probe head for analog scanning on select Global Silver CMMs. The 3-D analog scanning probe collects thousands of data points for evaluation of complex part features. It supports single-point probing, high-speed scanning, and self-centering modes in...

Continue Reading

Measuring arm offers wireless option - TheFabricator.com

Measuring arm offers wireless option

September 24, 2012

The Romer Absolute Arm with integrated laser scanner from Hexagon Metrology offers an acquisition speed of up to 50,000 points per sec. This enables users to move the scanner over the measurement object quickly while achieving high-quality data, even on difficult-to-scan surfaces, the company...

Continue Reading

MAC adds laser inspection equipment

September 20, 2012

MAC has installed a Xiris WI2000p laser inspection system for detecting undercut, sunk welds, pinholes, weld height, and weld register in tube and pipe. A high-speed video camera detects defects to 0.00059 in. on a typical laser welding tube mill. Direct integration with the tube mill's marking...

Continue Reading

Modular overhead track lighting system designed for NDT inspection - TheFabricator.com

Modular overhead track lighting system designed for NDT inspection

September 17, 2012

Spectronics Corp. has introduced the Spectroline® ONT-365 On-Trak™ NDT inspection system. The modular, overhead track light-style system, which employs UV-A and white light LEDs attached to a mountable platform, is suitable for use in NDT inspection booths, pre-inspections, and...

Continue Reading

Taking NDT as far as it can go - TheFabricator.com

Taking NDT to the end of tube, pipe

September 10, 2012 | By Joe Baldauff

NDT systems are limited in how close to the end of a tube or pipe they can test successfully. They rely on electromagnetic or ultrasonic waves to flow through the tube or pipe, and the end represents an abrupt change in the wall’s characteristics, making the test results difficult to interpret near the pipe or tube end. A new system overcomes the conventional obstacles by aiming clockwise, counterclockwise, and transverse transducers at a single point of entry. A timed delay based on the 1-kHz transmit frequency prevents the signals from interfering with each other, enabling the receiver to interpret the results accurately.

Continue Reading

Aicon acquires Breuckmann GmbH

September 5, 2012

Aicon 3D Systems GmbH, Braunschweig, Germany, has acquired more than 80 percent of Breuckmann GmbH, Meersburg, Germany, from Austria-based voestalpine Group. Dr. Bernd Breuckmann, founder and former owner-manager, holds 20 percent shares in the company. The brand Breuckmann GmbH remains unchanged....

Continue Reading

Laser profiling accessory attaches to crawler without tools - TheFabricator.com

Laser profiling accessory attaches to crawler without tools

September 4, 2012

The new RedLine™ laser accessory from Envirosight LLC attaches to the ROVVER X™ inspection crawler to perform geometric profiling of the insides of buried pipelines. Captured profile data is analyzed to verify proper pipe installation, plan relining projects, determine remaining pipe...

Continue Reading